Publicidad
LMD-A180
* Longitud de tornillos M4 (lateral, posterior)
# Longitud de tornillos M4 (posterior)
Carcasa del monitor
Notas
Es importante que apriete los tornillos usando un
destornillador adecuado para los tornillos
suministrados.
Si utiliza un destornillador eléctrico, aplique el
siguiente par de apriete.
Para tornillos M4: aproximadamente 1,2 N·m [12
kgf·cm]
Al realizar la instalación en un vehículo, fije la unidad
en el vehículo utilizando los orificios para tornillos M4
de la parte lateral de la unidad.
(El ángulo de inclinación es de 10° respecto al ángulo
de depresión.)
* 6 a 8
# 10 a 14
Tornillo M4
Objeto conectado
Unidad: mm
AVISOS Y LICENCIAS SOBRE
EL SOFTWARE UTILIZADO
EN ESTE PRODUCTO
uSSH (Secure Shell) SDK
Copyright (C) 2009-2019 Cypherbridge Systems, LLC.
All Rights Reserved.
www.cypherbridge.com
--------------------------------------------
Dropbear contains a number of components from
different sources, hence there are a few licenses and
authors involved. All licenses are fairly non-restrictive.
The majority of code is written by Matt Johnston, under
the license below.
Portions of the client-mode work are (c) 2004 Mihnea
Stoenescu, under the same license:
Copyright (c) 2002-2008 Matt Johnston
Portions copyright (c) 2004 Mihnea Stoenescu
All rights reserved.
Permission is hereby granted, free of charge, to any
person obtaining a copy of this software and associated
documentation files (the "Software"), to deal in the
Software without restriction, including without
limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the
Software, and to permit persons to whom the Software
is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice
shall be included in all copies or substantial portions of
the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO
THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE
FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF
CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS
IN THE SOFTWARE.
==============
AVISOS Y LICENCIAS SOBRE EL SOFTWARE UTILIZADO EN ESTE PRODUCTO
43
Publicidad
