Important Safety Instructions - Singer XL-420 Manual De Instrucciones

Tabla de contenido

Publicidad

This household sewing machine is designed to comply with IEC/EN 60335-2-28 and
UL1594.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety precautions should always be followed,
including the following:
Read all instructions before using this household sewing machine. Keep the instructions in
a suitable place close to the machine. Make sure to hand them over if the machine is given
to a third party.
DANGER –
• A sewing machine should never be left unattended when plugged in. Always unplug this
sewing machine from the electric outlet immediately after using and before cleaning,
removing covers, lubricating or when making any other user servicing adjustments
mentioned in the instruction manual.
WARNING –
• Do not allow to be used as a toy. Close attention is necessary when this sewing machine
is used by or near children.
• Use this sewing machine only for its intended use as described in this manual. Use only
attachments recommended by the manufacturer as contained in this manual.
• Never operate this sewing machine if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water. Return the sewing
machine to the nearest authorized dealer or service center for examination, repair, electrical
or mechanical adjustment.
• Never operate the sewing machine with any air openings blocked. Keep ventilation
openings of the sewing machine and foot control free from the accumulation of lint, dust,
and loose cloth.
• Keep fingers away from all moving parts. Special care is required around the sewing
machine needle.
• Always use the proper needle plate. The wrong plate can cause the needle to break.
• Do not use bent needles.
• Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
• Wear safety glasses.
• Switch the sewing machine off ("0") when making any adjustment in the needle area, such
as threading needle, changing needle, threading bobbin, or changing presser foot, etc.
• Never drop or insert any object into any opening.
• Do not use outdoors.
• Do not operate where aerosol (spray) products are being used or where oxygen is being
administrated.
• To disconnect, turn all controls to the off ("0") position, then remove plug from outlet.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• The foot control is used to operate the machine. Avoid placing other objects on the foot
control.
• Do not use the machine if it is wet.
• If the LED lamp is damaged or broken, it must be replaced by the manufacturer or its
service agent or a similarly qualified person, in order to avoid a hazard.
• If the supply cord connected with the foot control is damaged, it must be replaced by
the manufacturer or its service agent or a similarly qualified person, in order to avoid a
hazard.
• This sewing machine is provided with double insulation. Use only identical replacement
parts. See instructions for Servicing of Double-Insulated Appliances.
SAVE THESE INSTRUCTIONS
To reduce the risk of electric shock:
To reduce the risk of burns, fire, electric shock, or injury to person:
Eng 1

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Xl-400Seqs-6000

Tabla de contenido