Singer XL-420 Manual De Instrucciones página 118

At this point, you have 3 options from which to choose:
• you can click on OK if no changes are desired,
• you can click on Cancel to cancel the procedure and move
back to the Machine Navigator dialogue box,
• you can click and drag the Offset slide bar to move the
upper and lower designs closer or further away, allowing
you to preview how you want your endless embroidery
designs to be positioned relative to one another when they
stitch out. Once you have determined how you want the
designs to be placed relative to one another as you sew
them, click OK.
5. Before you start to sew, deactivate the Thread Cutter
Mode on the machine's main control panel. This will
help prevent the thread from coming out of the needle
with sewing alignment stitches and long jump stitches.
Thread the top of the machine, and leave a thread tail
approximately 6-8" long.
6. Press the Start/Stop button to embroider the endless
design. You will notice that the design starts first with a
set of "L"-shaped alignment stitches at the top left and top
right corners of the design area, before the main design
is stitched out. They are used to aid in repositioning the
hoop as you join the design segments together. After the
main embroidery is stitched, the design finishes with a set
of alignment stitches at the bottom left and bottom right of
the design.
7. When the design has finished embroidering, the 'Machine
Navigator' dialogue box disappears. As long as there have
been no changes or edits to the design after transmission
of data, there is no need to re-send the design to the
machine. The data is ready for the next repeat.
The 'Color Block List' should be displayed along the
bottom of the PC screen for easy reference regarding
color sequence. If it is not, the Color Block List can be
accessed from the main menu. Go to 'Tools', then scroll
down to 'Color Block List.' You will see the color sequence
of your selected design displayed at the bottom of your PC
screen.
8. Before releasing the hoop, press any one of the shift
buttons (left, right, up or down) on the control panel to
move the needle to its original position.
112
E
Left Right Up
Gauche Droite Haut
Izquierda Derecha Arriba
Image 4
Color Block List
Image 4
Liste de Bloc de Couleur
Imagen 4
Lista de Bloque de Colores
Down OK Clear
Bas OK Supprimer
Abajo OK Borrar