•
Do not turn the product more than 45° on a ramp.
To lift the product
WARNING:
equipment has the correct specification to
lift the product safely. The type plate on the
product shows the product weight.
WARNING:
or near a lifted product. Keep bystanders
away from the work area.
WARNING:
product. Make sure that the lifting eyes are
correctly installed and not damaged.
WARNING:
tank is correctly installed before you lift the
product.
1. Attach the lifting equipment at the lifting eyes (A)
from all 4 points.
2. Lift the product safely.
1991 - 001 - 02.06.2023
Make sure that the lifting
Do not walk or stay below
Do not lift a damaged
Make sure the propane
A
To set the product in transport position
1. Fold down the handle. Refer to
page 10 .
2. Turn the lever (A) for the dust skirt up.
A
To attach the product to a
transportation vehicle
Use the lifting eyes to attach the product to the
transportation vehicle.
1. Attach the tie-down straps in the lifting eyes.
2. Attach and tighten the tie-down straps to the
transportation vehicle.
Handle positions on
A
21