Descargar Imprimir esta página

Husqvarna BMG 555 P Manual Del Usuario página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

Keep propane tanks in a safe area with sufficient
airflow.
Safety instructions for operation
WARNING:
instructions that follow before you use the
product.
Use personal protective equipment. Refer to
Personal protective equipment on page 6 .
Overexposure to vibration can cause circulatory
damage or nerve damage to persons with decreased
blood circulation. Get medical aid if you have
symptoms of overexposure to vibration. These
symptoms include numbness, loss of feeling,
tingling, pricking, pain, loss of strength, changes
in skin color or condition. These symptoms usually
show in the fingers, hands or wrists.
Do not operate the product without all protective
covers installed.
Make sure that you know how to stop the motor
quickly in an emergency.
Before you go away from the product, stop the motor
and disconnect the power cord. Make sure that there
is no risk of accidental start.
Make sure that clothing, long hair and jewelry do not
get caught in moving parts
Make sure that you are in a safe and stable position
during operation.
Only operate the product on horizontal surfaces.
Do not operate the product unless you can get aid if
an accident occurs
Always use approved accessories. Speak to your
Husqvarna dealer for more information.
If vibrations occur in the product or the noise level
from the product is unusually high, stop the product
immediately. Examine the product for damages.
Repair damages or let an approved service agent
do the repair.
Only start the product with the brush strip attached.
The brush strip must seal tightly to the surface,
especially during dry surface operations.
Make sure that the brush strip is clean and not
damaged. Replace a damaged brush strip.
Connect the product to a dust extractor for removal
of the dust.
Do not pull the hose of the dust extractor. The
product can fall and cause injury or damage.
Keep the dust extractor on until the motor stops fully.
Make sure that the grinding head does not touch the
surface when you start the product.
Only operate the product from behind with your
hands on the handlebar.
Make sure that there is no grease or oil on the
handles.
Always keep the 2 wheels on the ground during
operation.
6
Read the warning
Personal protective equipment
WARNING:
instructions that follow before you use the
product.
Always use approved personal protective equipment
when you operate the product. Personal protective
equipment cannot fully prevent injury but it
decreases the degree of injury if an accident does
occur. Let your dealer help you select the correct
personal protective equipment and when to use it.
Use approved eye protection while you operate the
product.
Do not use loose, heavy and not applicable clothing.
Use clothes that let you move freely.
Use approved protective gloves that enables a solid
hold.
Use rubber protective gloves that prevents skin
irritation from wet concrete.
Always use approved hearing protection while you
operate the product. Noise for a long period can
cause noise-induced hearing loss.
The product makes dust and fumes that contain
dangerous chemicals. Use an approved breathing
protection.
Use boots with steel toe-caps and non-slip soles.
Make sure that you have a first aid kit near.
Sparks can occur when you operate the product.
Make sure that you have a fire extinguisher near.
Noise safety
WARNING:
instructions that follow before you use the
product.
High noise levels and long-term exposure to noise
can cause noise-induced hearing loss.
To keep the noise level to a minimum, do
maintenance on and operate the product as given
in the operator's manual.
Use approved hearing protection while you operate
the product.
Listen for warning signals and voices when you use
hearing protection. Remove the hearing protection
when the product is stopped, unless hearing
protection is necessary for the noise level in the work
area.
Read the warning
Read the warning
1991 - 001 - 02.06.2023

Publicidad

loading