Playing Back A Bonus Group - JVC KD-ADV38 Manual De Instrucciones

Playing back a bonus group

If a DVD Audio including a "bonus group"
is detected, the BONUS indicator lights up on the disc
information screen.
To play a bonus group...
1
Select the bonus group.
• The bonus group is usually recorded as the last
group.
2
Enter the key number.
: Move the entry position
: Select a number
• "key number" (a kind of password) for the bonus
group is not open to public. The way of getting
the key number depends on the disc.
3
Follow the interactive instructions shown on
the monitor.
Selecting browsable still picture
When a disc including browsable still
pictures is detected, the B.S.P indicator lights up on the
disc information screen.
When disc shows the BSP selecting icons such as @ or
# on the screen...
1
Select an item you want to display.
2
Enjoying surround sounds
You can enjoy multi-channel surround playback
through the front, center, surround speakers.
• After connecting the center speaker, make
sure to activate the center speaker; otherwise,
no sound comes out of the center speaker (☞
page 52).
• All surround mode can also be used for "USB."
MULTI: For multi-channel encoded sources such as
1
Dolby Digital* , DTS*
activated, "MULTI" is shown on the source
information screen.)
Dolby Pro Logic II (Movie/Music): For 2 channel
sources except for DivX/MPEG 1/MPEG2 discs.
To turn on the surround
1
AV Menu
Setup
2
Disc Surround menu icon
AV Menu
Disc Surround
3
Disc Surround
Auto
• Surround Off: Deactivates surround.
• Surround On: Activates surround = go to the
following steps.
22
2
, and DVD Audio. (When
Enter
ENT
Enter
ENT
Surround Off
Surround On