Descargar Imprimir esta página

Sony CMT-T1 Manual De Instrucciones página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

Chapter 1:
Setting
up
Connecting the Stereo
Inserting the batteries
Setting the Clock
EN
4
Chapter 1: Setting up
Connecting the
Stereo
Use the illustrations below to connect your
stereo.
STEP 1
Connecting the
Flat Cord
Connect the tuner CD player and the stereo
cassette deck with the flat cord (supplied)
pushing in the connector until it clicks.
To disconnect the flat cord
Pull out the connector of the flat cord while
pressing its sides. Do not pull the flat cord
itself.
STEP 2
Connecting the
Right Speaker
Connect the right speaker to the tuner CD
player with the audio cord (supplied) and
the mains lead.
Connecting the audio cord
Connect firmly the white plug to the white
(L) jack and the red plug to the red (R) jack.
White
Red
Connecting the mains lead of the
right speaker
Connect the mains lead of the right speaker
to AC OUTLET on the rear panel of the
tuner CD player.
STEP 3
Connecting the
Left Speaker
Connect the left speaker to the right
speaker with the speaker cable (supplied).
Be sure to keep the speaker cable away
from the aerials.
Grey cord to ](red)
Twist each tip
Black-lined cord to } (black)
]
}

Publicidad

loading