•
Do not place liquid containers on the appliance.
•
In case of fire, use dust extinguishers. Do not use water.
•
Switch off the appliance immediately in case of spilling of foam or liquid
HANDLING THE PACKED MACHINE
The machine is consigned in specific packaging. These packaging elements (plastic bags, clips, etc.) are potential sour-
ces of danger and must not therefore be left within the reach of children, incompetent persons, etc. The overall weight of
the machine plus its packaging is 48,5Lb WD21V
ATTENTION: the packaged machine must be handled in accordance
with the legal regulations relating to accident prevention and the size
and weight of the package itself.
The dimensions of the package are as follows:
U/M
A
inch
B
inch
C
inch
UNPACKING THE MACHINE
1.Open the outer cardboard box.
2.Remove the accessories from the box.
3.Remove the vacuum head from its support and rest it carefully on the ground.
ATTENTION: you are advised to always wear protective
gloves, to avoid the risk of serious injury to your hands.
4.Remove the cardboard holding the vacuum head in position.
5.Remove the vacuum hose from the collection tank.
6.Take the machine out of the box, taking care not to damage either of them.
ATTENTION: you are advised to keep all the packaging
elements for any future transportation of the machine.
MOVING THE MACHINE
1.Make sure the collection tank is empty. If this is not the
case, empty it (read "EMPTYING THE COLLECTION TANK").
2.Press the button (1) in the vacuum nozzle and pull on the
vacuum hose (2) to remove it from the collection tank.
ATTENTION: you are advised to always wear protective
gloves, to avoid the risk of serious injury to your hands.
3.Insert the machine in the box, taking care not to damage either
of them.Remember to place the machine wheel restraint in the
bottom of the box.
4.Wind the vacuum hose around the collection tank.
5.Close the box.
PREPARING THE MACHINE
WD21V
24,8
20,4
41
10