Hillyard Trident WD21V Manual De Uso página 17

7.Use a suitable tool to fix the squeegee support (3) to the collection tank with the screws (5) and wa-
shers (4).
ATTENTION: remember to spread a bit of thread-locking
fluid (medium resistance) on the threaded part of the
screws before tightening them on the collection tank.
8.Take hold of the front squeegee unit (6).
9.Insert the right-hand pin (7) of the squeegee in the right-hand slot (8) of the squeegee connection.
ATTENTION: this operation can be simplified
by first loosening the handwheel (9) on the pin.
10.Repeat the same operation for the left pin.
11.Then tighten the handwheels (9) to lock the squeegee in place.
12.Finally, insert the vacuum hose (10) of the squeegee into the relative joint (11) of the vacuum nozzle.
13.Press the button (12) on the vacuum nozzle.
14.Insert the vacuum hose (10) in the hole (13) on the vacuum nozzle.
17