Replacing The Permanent Fabric Filter (Optional) - Hillyard Trident WD21V Manual De Uso

REPLACING THE PERMANENT FABRIC FILTER (OPTIONAL)

The good operation of the permanent fabric filter will ensure a longer working life for the
machine. To replace the filter, proceed as follows:
1.Take the machine to the designated maintenance area.
2.Make sure the machine is in a safe condition (read "MACHINE SAFETY").
3.Free the vacuum head from the collection tank by releasing the hooks (1) on the side of
the tank. Rotate the levers as shown by the arrow in the picture on the right.
ATTENTION: you are advised to always
wear protective gloves, to avoid the risk of
serious injury to your hands.
4.Use the handle (2) on the vacuum head unit to remove it from the collection tank.
5.Rest the head carefully on the ground.
6.Remove the filter tensioner (3) from the collection tank, and rest it on the ground.
7.Remove the permanent fabric filter (4) from the collection tank.
8.Replace it with the new filter, then repeat the operations in reverse order to reassemble
all the parts.
36