Preparing The Machine Work - Hillyard Trident WD21V Manual De Uso

Before beginning to work, it is necessary to:
1.Before use, it's important to check the good condition and working safety of the device with the
work equipment (especially the power supply cable and extension cable) connected. If the condi-
tions are not perfect, any use of the machine is forbidden.
2.Make sure the machine is in a safe condition (read "MACHINE SAFETY").
3.Press the button (1) on the vacuum nozzle.
4.Insert the vacuum hose (2) in the hole (3) on the vacuum nozzle.
5.Select the most suitable accessory for the task to be carried out (read "CHOOSING AND USING
THE ACCESSORIES").
6.Select the most suitable extension for the type of work to be carried out.
7.Insert the extension in the nozzle on the vacuum hose.
8.Connect the female part of the extension to the male part.
9.Insert the accessory.
ATTENTION: never use the machine without
the right filter for the type of work being car-
ried out.
PREPARING THE MACHINE
18