Inserting The Nylon Filter (Optional) - Hillyard Trident WD21V Manual De Uso

NSERTING THE NYLON FILTER (OPTIONAL)
To insert the nylon filter in the collection tank, proceed as follows:
1. Make sure the machine is in a safe condition (read "MACHINE SAFETY").
ATTENTION: you are advised to always
wear protective gloves, to avoid the risk of
serious injury to your hands.
2. Free the vacuum head from the collection tank by releasing the hooks (1) on
the side of the tank. Rotate the levers as shown by the arrow in the picture on
the right.
3. Use the handle (2) on the vacuum head unit to remove it from the collection
tank.
4. Rest the head carefully on the ground.
5. Insert the nylon filter (3) in the tank. To fix it in place, stick it to the edge of the
tank opening.
ATTENTION: the nylon filter must only be
used together with the filter/float kit or the
permanent fabric filter
14