Tabla De Contenido - Sony PVM-9043MD Instrucciones De Uso

English
WARNING
To prevent fire or shock hazard, do not expose the unit to
rain or moisture.
Dangerously high voltages are present inside the unit. Do not
open the cabinet. Refer servicing to qualified personnel only.
In the event of a malfunction or when maintenance is
necessary, consult an authorized Sony dealer.
FOR CUSTOMERS IN THE UNITED KINGDOM
WARNING
THIS APPARATUS MUST BE EARTHED
IMPORTANT
The wires in this mains lead are coloured in accordance with
the following code:
Green-and-yellow Earth
Blue Neutral
Brown Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be
connected to the terminal in the plug which is marked by the
letter E or by the safety earth symbol
green-and-yellow. The wire which is coloured blue must be
connected to the terminal which is marked with the letter N or
coloured black. The wire which is coloured brown must be
connected to the terminal which is marked with the letter L or
coloured red.
Symbols on the unit
Symbol Location
Rear panel
Inside the unit
Rear panel
i
or coloured green or
This symbol indicates
The equipotential terminal
which brings the various
parts of a system to the
same potential.
Presence of uninsulated
"dangerous voltage" within
the product's enclosure
that may be sufficient to
constitute a risk of electric
shock.
Attention, consult
ACCOMPANYING
DOCUMENTS
Table of Contents
Features ...............................................................................1
Location and function of parts and controls .......................... 2
Front .................................................................................2
Rear .................................................................................3
Attaching the side cover .......................................................4
Attaching the control panel cover .........................................4
Power sources ......................................................................4
Specifications ....................................................................... 5
Precautions
This unit contains substances which can pollute the
environment if disposed carelessly. Please contact our
nearest office or your local environmental office in case of
disposal of this unit.
On safety
• Operate the unit on 100 - 240 V
current)
• The nameplate indicating operating voltage, power
consumption, etc. is located on the rear.
• Should any solid object or liquid fall into the cabinet,
unplug the unit and have it checked by qualified personnel
before operating it any further.
• Unplug the unit from the wall outlet if it is not to be used for
several days or more.
• To disconnect the AC power cord, pull it out by grasping
the plug. Never pull the cord itself.
• Protection class 1, Group 3, Type B
• No regular service maintenance is required.
• The x-ray radiation produced by this equipment is
sufficiently shielded. Acceleration voltage max 16 kv
• The socket-outlet shall be installed near the equipment
and shall be easily accessible.
• Degree of Protection against ingress of moisture: Ordinary
On installation
• Allow adequate air circulation to prevent internal heat
build-up.
Do not place the unit on surfaces (rugs, blankets, etc.) or
near materials (curtains, draperies) that may block the
ventilation holes.
• Do not install the unit in a location near heat sources such
as radiators or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration or shock.
On cleaning
To keep the unit looking brand-new, periodically clean it with
a soft cloth. Stubborn stains may be removed with a cloth
lightly dampened with a mild detergent solution. Never use
strong solvents such as thinner or benzene, or abrasive
cleansers since these will damage the cabinet. As a safety
precaution, unplug the unit before cleaning it.
On repacking
Do not throw away the carton and packing materials. They
make an ideal container in which to transport the unit. When
shipping the unit to another location, repack it as illustrated
on the carton.
⁄ ⁄
. ( : Alternating