BRAND Transferpette-8 Instrucciones De Manejo página 58

5 Pipetting programs
c.
1 x
d.
1 x
e.
1 x
f.
1 x
g.
5.2 PIPmix mode
Program for mixing liquids. Sample is aspirated and dispensed repeatedly.
Volume and speed setting, see Set volume, p. 53 and Set the aspiration and dispensing speed, p. 54.
58
Operating manual
c.
Confirm PIP mode: Press 'Enter' key.
ð
The display now shows 'blo' for blow-out.
d.
Preparing for pipetting: Press the pipetting key once to
move the piston to its start position.
ð
The arrow in the display points upwards (aspiration).
e.
Aspirate liquid: Press the pipetting key once to aspirate
the liquid.
f.
Dispense liquid: The liquid is dispensed by pressing the
pipetting key once.
ð
The arrow in the display points downwards (dispens-
ing).
g.
Trigger blow-out? You do not have to do anything.
When pipetting in PIP mode, the blow-out is performed
automatically.
Transferpette® -8/-12 electronic 997200