Making Another Call While Talking On The Other Line - Sony SPP-M100 Manual De Instrucciones

Making calls (continued)
Making another call while talking on the
other line
You can talk with two parties at the same time using both line 1 and
line 2. (Three-way conference)
1
Press (HOLD) while talking on one line.
The line in use is put on hold.
2
Press (LINE 1) or (LINE 2), whichever is not
used.
3
Dial a phone number for the second party.
4
Press (CONF) (conference) after you're
connected to the second party.
Now you can talk to both parties.
To disconnect the lines during a three-
way conference
To disconnect both lines at the same time, replace
the handset on the base unit or press (TALK).
To disconnect line 1 and talk on line 2 only, press
(LINE 2).
To disconnect line 2 and talk on line 1 only, press
(LINE 1).
To put the lines on hold during a three-way conference
Press (HOLD) once so that both lines are put on hold.
To resume the conversations on both lines, press (CONF).
To resume the conversation only on one line, press (LINE 1) or
(LINE 2), for the line you want. (The other line is kept on hold.)
Tip
During a three-way conference, you can't use "call waiting" service even if you
press (FLASH).
EN
14
Basics
(TALK)
(LINE 1)
(REDIAL/PAUSE)
(HOLD)
(CONF)
(LINE 2)
(CHANNEL)
(FLASH)
(BATT CHECK)