Pur Line NTW-09 Manual De Instrucciones página 16

EN
3. Affix the secondary stickers on the wall
plug to fix it. Show as Figure 3
4. Make it still and wait for 72hours when the
Figure 3
glue is solidified, and then start Step 3.
Option B: Fix the dryer by screws
Warning: Always ensure intended wall area to be drilled is free from hidden electrical wires,
water and/or gas pipes.
1. Drill the holes (Ø6mm) in the wall according to Figure 4 and Figure 5.
2. Strike 4 wall plugs provided into the 4 holes
3. Match the hole of the fixing board with the wall plugs, and fix the board with 4 screws.
Figure 4 Figure 5
14