Pur Line NTW-09 Manual De Instrucciones página 17

Step 3
1. Loose the socket head screws in the two
sides of the heating part, as show in figure 6.
2. And then connect the heating part and the
connecting bar.
3. Tight the socket head screw by the hex
screwdriver
4. Loose the screws in the two sides of rack,
and buckle it on the two columns of the
heating part. And then tight the screws by
the slotted screw driver. As show in figure 7.
5. Cover the hole on the wall plugs. Show as
fire 8
Warning: The total hanging weight would not be over 15kg.
EN
15
Figure 6
Figure 7
Figure 8