Publicidad
Idiomas disponibles
Idiomas disponibles
36892-05-DKP 2540 E
GB
A Incorrect
B Incorrect
C Correct
•
Before using for the first time leave the hot plates switched on for 5 minutes in
order to remove the protective layer. This may lead to the development of small
quantities of smoke. Ensure sufficient ventilation.
Electrical Connection
•
Ensure that the machine is switched off (all operating switches on "0").
•
Before inserting the mains plug into the socket check whether the voltage which
you intend to use corresponds to that of the machine. Please see the label on
the machine for details.
•
Only connect the machine to a correctly installed safety socket, 230 V/50 Hz.
Use of the Hot Plates
•
Only use saucepans with a flat bottom in order to make optimum use of the
energy (see diagram 1).
•
The saucepan should never be smaller than the hot plate. Otherwise energy will
be wasted. In extreme cases the hot plate may deform.
•
The switch of the hot plates makes it possible to finely adjust the heating level to
the cooking process (see diagram 2).
Switching-Off
The machine is switched off if all switches are in position "0". Then remove the
mains plug.
•
Before cleaning the machine always remove the mains plug and wait until the
machine has cooled down.
•
Clean the machine only with a slightly damp cloth. Do not use strong detergents
or solvents. Rinsing water is suitable.
26
02.12.2002 10:35 Uhr
First Use of the Machine
Operation
Cleaning
Seite 26
A Switch position
B Working area
C Switch scale
D Off
E Keep warm
F Continue cooking
G Roasting
H Initial cooking, initial roasting
Publicidad
