MEGABRAS MD 5060x Manual De Uso página 15

5.2. Selection of the operation mode
The MD-5060x insulation tester has four operation modes: Normal, with
"TIMER", SVT and "Pass / Fail test". The first three modes are selected
using the key; the "Pass/ Fail test" mode is activated pressing
key.
5.2.1. "TIMER" Mode
The use of key allows the MD-5060x setting for the performance of a
pre-set - duration test; when this mode is selected, the display shows the
programmed time. Use and keys to define the duration of the
tests in 30 seconds, 1 minute, 3 minutes, 10 minutes or 30 minutes.
16