MEGABRAS MD 5060x Manual De Uso página 9

2.3. Indicators
2.3.1. Display
Alphanumeric LCD where the measurement result, the corresponding
measuring unit, the elapsed time since the measurement started, the
analogue indication by means of a bargraph and messages to the
operator are displayed (in English).
messages to the operator
test number
measurement results
measuring unit
analogue indication
(bargraph)
2.3.2. Built-in chronometer
It features the elapsed time (in minutes and seconds) since test voltage is
applied.
2.3.3. Real time clock
It has a real time clock with date, hours and minutes indication, to make
identification of tests recorded in memory easier.
2.3.4. Test number
Tests are automatically numbered by the equipment to make their
identification easier.
2.3.5. Model and serial number
At the beginning of each test, the equipment model, as well its serial
number, are registered, making it possible to relate the obtained results
with their respective equipment Calibration Certificate.
time indication
selected voltage
messages to the operator
10