MEGABRAS MD 5060x Manual De Uso página 18

5.2.4. Normal mode
The normal mode is used in the resistance measurement with unique
voltage, without time limit. When selected, there are no special indications
in the display. To return to normal mode, press the key and use the
or to select the "- - -" option.
6. How to perform tests
Press key. The high voltage led turns on immediately, indicating that
the equipment internal generator is applying voltage to the element that is
being tested. The display will show the test number, the selected voltage
value and it will start the elapsed time count.
For a few seconds, the auto-range system will search for the most
convenient range for the value being measured. Meanwhile, the display
will show the message:
19