Fein MSfv 649 Manual Del Usuario página 13

MSfv 649 - Buch Seite 13 Donnerstag, 13. Dezember 2001 9:47 09
MSfv 649
Maintenance and repairs.
!
Risk of injury
Service, testing and repairs may only be car-
ried out by electrical engineers in conformity
with the regulations valid in the respective
country.
Maintenance and repairs.
We recommend our customer service
department (repair centre), FEIN author-
ised service centres and agencies.
Addresses can be found at the end of
these operating instructions and in the
enclosed safety instructions.
Please hand these operating instructions
to the repair centre. An overview of spare
parts can be found at the end of these
operating instructions.
Upon request a repair manual is sent to
the electrical engineers.
Only use original FEIN spare parts.
Spare parts.
The overview of spare parts is at the end
of these operating instructions. Quoting
the parts no. (1), reference no. (2) as well
as the number of spare parts (3) facilitates
the ordering procedure.
Accessories.
Illustrations and reference numbers can be
found at the end of these instructions.
Description of the accessories:
A Rough grinding disc, bent at right
angles for steel.
B Cut-off grinding disc for steel.
C Cut-off grinding disc for stone.
D Inner flange.
E Threaded flange M 14, for wheels up
to 6 mm.
F Threaded flange M 14, for wheels up
to 8 mm.
G Carry case, metal
(700 x 180 x 100 mm).
Environmental protection.
Packaging, worn out power tools and
accessories should be recycled.
Further information is available from your
dealer.
Guarantee.
FEIN power tools are guaranteed in
accordance with statutory and national
regulations (evidence of purchase by
invoice or delivery note).
Damage caused by improper handling,
overload or normal wear is not included
in the guarantee.
Please contact our customer service
(repair centre), FEIN authorised service
centres or agencies.
EN
13