6.2.3 Probe menu
Touch
to enter.
Touch
to go ahead.
real-time probe values are displayed:
iB0
: Dew point temperature.
iB2
: Evaporator temperature.
iB8
: Discharge compressor temperature.
iB5
: Suction compressor temperature.
iB3
: Ambient temperature.
iP1
: High pressure (condenser).
English
6.2.4 Digital input menu
Touch
to enter.
Local ON/OF: green when remote start contact is closed, otherwise it is gray.
Condensate level: green when there is condensation to drain, otherwise it is gray.
Monitoring phase: green when phase sequence is correct, otherwise it is gray:
Compressor protection: green when compressor protection is in the normal operating position, other-
wise it is gray.
High Pressure switch: green when pressure switch protection is in the normal operating position,
otherwise it is gray.
Low Pressure switch: green when pressure switch protection is in the normal operating position,
otherwise it is gray.
PSE 325-1000 60Hz
16/20