Braun Aesculap Acculan 3Ti Instrucciones De Manejo/Descripción Técnica página 23

8. Troubleshooting list
Malfunction
Insufficient power output –
Motor not running
9. Technical Service
Danger to life of patients and
users if the product malfunc-
tions and/or protective mea-
WARNING
sures fail or are not used!
►
►
►
For service and repairs, please contact your
national B. Braun/Aesculapp agency.
Modifications carried out on medical technical equip-
ment may result in loss of guarantee/warranty rights
and forfeiture of applicable licenses.
Service addresses
Aesculap Technischer Service
Am Aesculap-Platz
78532 Tuttlingen / Germany
Phone: +49 (7461) 95 -1601
Fax: +49 (7461) 14 -939
E-Mail: ats@aesculap.de
Other service addresses can be obtained from the
address indicated above.
Detection
Symbol "Battery replace-
ment recommended" illu-
minated on the charger
–
No acoustic signal on
insertion of the battery
Do not perform any servic-
ing or maintenance work
under any circumstances
while the product is being
used on a patient.
Do not modify the product.
Cause
Battery not fully charged
End of service life of bat-
tery
Motor defective
Battery defective
10. Accessories/Spare parts
Art. no. Designation
GA672207 Kirschner wire protection sleeve
GA672211 Rinsing adapter
GA675 Cover
GA346 Li-Ion battery
GA666 NiMH battery
GA677 Charger
GA678 Sterile funnel
GA679 Battery removal device
GB243R ECCOS tray with holders for
GB244R Acculan 3Ti
GB600 Aesculap-STERILIT-Power Sys-
tems oil spray
GB600840 STERILIT Power Systems adapter
TA011944 Cleaning brush
Note
For further information on the small drill attachments,
see TA011936 (Acculan 3Ti)
(Acculan 4).
For further information about the Aesculap ECCOS fix-
ation system, see TA009721.
Remedy
Charge the battery in the
charger
Have battery repaired by
the manufacturer
Have motor repaired by the
manufacturer
Have battery repaired by
the manufacturer
and/or TA014540
en
21