en
►
Have a second person guide battery 13 (unsterile)
into the battery compartment, see Fig. 2. Observe
coding 16 when doing this.
13
14
Fig. 2
Note
The coding on the floor of the battery compartment of
the unit must match the coding at the bottom of the
battery.
Note
After insertion of the battery, a series of acoustic blips
will indicate that the drill and reamer is ready for oper-
ation.
8
►
Once the battery has been inserted, have a helper
remove sterile funnel 14 (unsterile), see Fig. 3.
14
16
Fig. 3