2.
Safe handling
Risk of injury and material
damage if this product is not
used as intended!
WARNING
►
Risk of injury and damage to
property due to improper han-
dling of the product!
WARNING
►
►
Remove the transport packaging and clean the new
product, either manually or mechanically, prior to
its initial sterilization.
►
Prior to use, check that the product is in good work-
ing order.
►
See "Information on electromagnetic compatibility
(EMC) for Acculan components" TA022450; see
Aesculap Extranet at https://extranet.bbraun.com
►
To prevent damage caused by improper setup or
operation, and in order not to compromise war-
ranty and manufacturer liability:
– Use the product only according to these
instructions for use.
– Follow the safety and maintenance instruc-
tions.
– Only combine Aesculap products with each
other.
►
Ensure that the product and its accessories are
operated and used only by persons with the requi-
site training, knowledge, or experience.
►
Use product and accessories in surgery and/or in
the framework of emergency medical treatment.
►
Keep the instructions for use accessible for the
user.
►
Always adhere to applicable standards.
►
Observe the instructions for use of Acculan 3Ti
charger TA022160.
Use the product only for its
intended purpose.
Follow the instructions for
use of all products used.
3.
Product description
3.1
Scope of supply
Designation
drill and reamer
Kirschner wire protec-
tion sleeve
Rinsing adapter
Cover
Battery
Sterile funnel
STERILIT Power Systems
adapter
Cleaning brush
Instructions for use for
GA676
Instructions for use for
GA672
Instructions for use for
Acculan 3Ti attach-
ments
3.2
Components required for opera-
tion
Designation
drill and reamer
Battery (rechargeable,
charged)
Charger
Drill and reamer attach-
ments
Cover
Sterile funnel
en
Art. no.
GA672
GA672207
GA672211
GA675
GA676
GA678
GB600840
TA011944
TA011867
TA011869
TA011936
Art. no.
GA672
GA676
GA677
see TA011936
(Acculan 3Ti) and/or
TA014540 (Acculan 4)
GA675
GA678
5