Publicidad
Idiomas disponibles
Idiomas disponibles
ADJUSTING THE CUTTING LINE
10a
LENGTH
The trimmer head allows the operator to
release more cutting line without stopping
the motor. As line becomes frayed or
worn, additional line can be released by
lightly tapping the trimmer head on the
ground while operating the trimmer
(Fig. 10a).
WARNING:
Do not remove or alter
the line-cutting blade assembly. Excessive line length will cause the motor to overheat
and may result in serious personal injury.
For best results, tap the trimmer head on bare ground or hard soil. If line release
is attempted in tall grass, the motor may overheat. Always keep the trimming line
fully extended. Line release becomes more difficult as the cutting line becomes
shorter. Replace the line when necessary. For instructions, please see section "LINE
REPLACEMENT".
32
56-VOLT LITHIUM-ION COMMERCIAL 17.5" STRING TRIMMER — STX4500/STX4500-FC
Publicidad
