Publicidad
Idiomas disponibles
Idiomas disponibles
Tips for best trimming results
(Fig. 10b)
◾
The correct angle for the cutting
attachment is parallel to the ground.
◾
Do not force the trimmer. Allow the
very tip of the line to do the cutting
(especially along walls). Cutting
with more than the tip will reduce
cutting efficiency and may overload
the motor.
◾
The cutting height is determined by the distance of the cutting line from the lawn
surface.
◾
Grass over 8 inches (20 cm) should be cut by working from top to the bottom in
small increments to avoid premature line wear or motor drag.
◾
Slowly move the trimmer into and out of the area being cut, maintaining the
cutting head position at the desired cutting height. This movement can be either
a forward-backward motion or a side-to-side motion. Cutting shorter lengths
produces best results.
◾
Avoid trimming when grass and weeds are wet.
◾
Wire and picket fences can cause extra cutting line wear or breakage. Stone and
brick walls, curbs, and wood may wear cutting line rapidly.
◾
Avoid trees and shrubs. Tree bark, wood moldings, siding, and fence posts can
easily be damaged by the cutting line.
56-VOLT LITHIUM-ION COMMERCIAL 17.5" STRING TRIMMER — STX4500/STX4500-FC
10b
Direction of
Rotation
Dangerous
Cutting Area
Best cutting area
33
Publicidad
