Audio Settings - JVC KD-X262 Manual De Instrucciones

USB/iPod/ANDROID
Select a file from a folder/list
For iPod, applicable only when [HEAD MODE] is selected. (Page 9)
1
Press .
2
Perform 'Select an item (page 3 or 4)' operation to select a
folder/list.
3
Perform 'Select an item (page 3 or 4)' operation to select a file.
Quick search
(applicable only for USB source)
If you have many files, you can search through them quickly.
Perform the following operation to browse through the list quickly.
KD-X262/KD-X162: Turn the volume knob quickly
KD-X161: Press and hold VOL +/–
Alphabet search
(applicable only for iPod source)
You can search for a file according to the first character.
Press 2 J / 1 K or turn the volume knob quickly to select the desired
character (A to Z, 0 to 9, OTHERS).
• Select "OTHERS" if the first character is other than A to Z, 0 to 9.
• To return to the previous setting item, press
• To cancel, press and hold
10
ENGLISH
.
.

AUDIO SETTINGS

For key layout on the faceplate, see page 3 or page 4.
Select a preset equalizer directly
Press EQ-BASS repeatedly.
(or)
Press EQ-BASS, then turn the volume knob within 5 seconds.
Preset equalizer:
[FLAT] (default)/[DRVN 3]/[DRVN 2]/[DRVN 1]/[HARD ROCK]/[HIP HOP]/[JAZZ]/[POP]/
[R&B]/[TALK]/[USER]/[VOCAL BOOST]/[BASS BOOST]/[CLASSICAL]/[DANCE]
• Drive equalizer ([DRVN 3]/[DRVN 2]/[DRVN 1]) boosts specific frequencies in
the audio signal to reduce the noise heard from outside the car or running
noise of the tyres.
Select a drive equalizer directly
Drive equalizer boosts specific frequencies in the audio signal to reduce the
noise heard from outside the car or running noise of the tyres.
Press drvn-BASS repeatedly.
Drive equalizer: [DRVN 3] (default)/[DRVN 2]/[DRVN 1]
Store your own sound settings
1
Press and hold the following button to enter [EASY EQ] setting.
KD-X262/KD-X162: EQ-BASS
KD-X161: drvn-BASS
2 Perform 'Select an item (page 3 or 4)' operation to make the
setting.
Refer to [EASY EQ] (page 11) for setting and the result is stored to [USER].
• To return to the previous setting item, press
• Press the following button to exit.
KD-X262/KD-X162: EQ-BASS
KD-X161: drvn-BASS
(for KD-X262/KD-X162)
(for KD-X161)
.