Alarm Times; Setting Alarm Times; Activating The Alarm - Medion LIFE E66212 Manual De Instrucciones

button.
 The display alternates between time and date: Press the Tuning  button.
 For the display to show only the time, press the Tuning  or Tuning  button
once again.

8. Alarm times

8.1. Setting alarm times

 With the device in switched-off mode, briefly press the A L A R M 1 button to
access alarm mode 1.
The alarm time display flashes.
 Press the ▼- T U N I N G or T U N I N G -  button repeatedly until the desired
time is set.
 Press the N A P /T I M E R button to set the desired days (SA-SU, MO-FR,
MO-SU).
 Press the A L A R M 1 button repeatedly to set the desired alarm (
alarm ).
NOTE!
If the alarm is deactivated, neither the radio alarm
alarm
If you select the radio alarm, make sure that the volume you set is adequate.
To set the second alarm 'A L A R M 2 ' , proceed as described above, but by pressing
the A L A R M 2 button instead of A L A R M 1 button.

8.2. Activating the alarm

After setting the chosen time for the alarm, the alarm menu will automatically close
after approx. 15 seconds and the data you entered will be saved. The alarm settings
have now been activated and the relevant symbol will be shown in the display:
When the alarm is switched on, one of the following symbols will be displayed de-
pending on the chosen alarm function.
Alarm symbol 1
Radio alarm function
− The volume of the alarm can be programmed (see "7.3. Device set-
tings" on page 39)
Buzzer (increasing volume of the alarm tone)
is shown on the display.
radio or
nor the standard
43 of 74
ES
EN
DE