Cleaning The Device - Medion LIFE E66212 Manual De Instrucciones

3) Now rotate the projection arm in the desired direction (315° maximum).
Flip the arm back in if you are not using the projection function.
NOTE!
The projection light is active even with the projection arm flipped in.
Switch it off manually (with the P R O J E C T I O N O N / O F F button).
8.3.2. Activating the projection function
 Press the P R O J E C T I O N O N /O F F button to activate the projection func-
tion.
8.3.3. Rotating the projection arm
You can rotate the projection arm by up to 315° to project the time onto a wall of
your choice.
 Flip up the projection arm and pull it upwards until it clicks into place.
 You can now rotate the projection arm in any direction.
8.3.4. Adjusting the focus of the projection
You have the possibility of focusing the projected time.
 Push the F O K U S control located at the back of the projection arm up or
down.
The focus of the projection now changes.
8.3.5. Rotating the projection
You can rotate the projected time by 180°.
 Briefly press the P R O J E C T I O N O N /O F F button to rotate the projected
time by 180°.
8.3.6. Switching off the projection
 Hold down the P R O J E C T I O N O N /O F F button.
The projection and light are now switched off.

9. Cleaning the device

Wipe the device down regularly with a slightly moistened cloth or an anti-static
cloth.
46 of 74