Toro TimeCutter Max Manual Del Operador página 45

Engine-Oil Service (continued)
Checking the Engine-Oil Level
1. Park the machine on a level surface, disengage the blade-control switch, and move the
motion-control levers outward to the P
2. Shut off the engine, remove the key, and wait for all moving parts to stop before leaving
the operating position.
3. Wait for the engine to cool so that the oil has had time to drain into the sump.
4. To keep dirt, grass clippings, etc., out of the engine, clean the area around the oil-fill cap
and dipstick before removing it.
5. Check the engine-oil level as shown.
If you overfill or underfill the engine crankcase with oil and run the engine, you may
damage the engine.
3465-589A
position.
ARK
G373146s
IMPORTANT
Page 5–8 Maintenance: Engine Maintenance