Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTAINING YOUR VACUUM
EMPTYING THE DUSTCUP
Wand
Release
Disconnect the hand vacuum from the wand.
Press the dust cup Empty button.
s h a r kc l e a n . c o m
1
2
MAINTAINING YOUR VACUUM
CLEANING THE FILTERS
To clean filters, rinse with water only to prevent damage from cleaning chemicals. Allow all filters to air-dry
completely for at least 24 hours before replacing them in the vacuum to prevent liquid from being drawn
into electric parts.
IMPORTANT: DO NOT use soap when cleaning the filters.
FILTER COVER
FILTER
FRAME
PRE-MOTOR
FILTER
PRE-MOTOR FILTER
Remove cover and frame. Slide filter off frame.
Rinse with water. Air-dry completely for at least
24 hours before reinserting. Tap off loose dirt
between washes as needed.
NOTE: To order filters and other parts, visit sharkaccessories.com.
POST-MOTOR
FILTER
FILTER
COVER
POST-MOTOR FILTER
Remove cover and filter. Rinse filter with water.
Air-dry completely for at least 24 hours before
reinserting. Tap off loose dirt between washes
as needed.
s h a r kc l e a n . c o m
Publicidad
