Frigelux CA181BES Manual De Instrucciones página 23

▪
To avoid falling objects and prevent damage to the device, do not overload the device compartments.
To avoid contamination of food, please observe the following instructions:
•
Regularly clean food contact surfaces and accessible drainage systems.
•
Store raw meat and fish in suitable containers to avoid contact with any other food.
Warning! Cleaning and maintenance
▪
Before any maintenance, unplug the appliance and disconnect the power.
▪
Do not clean the device with metal objects, steam system, volatile oils, organic solvents or abrasive
components.
▪
Do not use sharp or pointed objects to remove the ice. Use a plastic scraper.
Important information about the installation!
▪
This refrigeration appliance is not intended to be used as a built-in appliance
▪
For the electrical connections to be correct, follow the instructions provided in this manual.
▪
Unpack the device and check that it is not visually damaged. Do not plug in the device if it is damaged.
Report any damage to the point of sale where you purchased it. In this case, keep the packaging.
▪
It is recommended to wait at least four hours before connecting the device to the current, so that the
compressor is well supplied with oil.
▪
Good air circulation is necessary to avoid the risk of overheating. To ensure sufficient ventilation, follow
the installation instructions provided.
▪
As soon as possible, prevent the appliance from touching walls and/or coming into contact with hot
elements (compressor, condenser) in order to avoid the risk of fire. Always follow the installation
instructions carefully.
▪
The appliance should not be located next to radiators or
▪
Make sure that the sockets are accessible once the device is installed.
ENERGY SAVINGS
To limit the power consumption of your device:
▪ Install it in a suitable place (see chapter "Installation").
▪
Keep doors open for as little time as possible.
▪
Do not put food that is still hot in your appliance.
▪
Ensure that your appliance is operating optimally by periodically cleaning the condenser (see the
"Maintenance" chapter).
▪
Make sure your appliance is operating optimally by not allowing too much frost to accumulate in the
freezer (defrost it when the thickness of frost exceeds 5 -6 mm).
▪
Periodically check the door seals and make sure they still close effectively. If this is not the case, contact
your after-sales service.
cooking fires.
23