Toro 20200 Manual Del Operador página 11

Stopping the Engine
Standard Model
Press the toggle switch (Figure 19) to the Stop position
and hold it until the engine stops.
Figure 19
Electric-start Model
1. Turn the key to the Off position (Figure 20).
Figure 20
2. When the engine stops, remove the ignition key and
take it with you when you leave the machine.
Engaging the Blade
When you start your engine, the blades do not turn. You
must engage the blades to mow.
1. Pull the blade-control-bar lock back to the
blade-control bar (Figure 21).
G017636
G017517
11
1
2
Figure 21
1. Blade-control bar lock
2. Slowly pull the blade-control bar back to the handle
(Figure 21).
3. Hold the blade-control bar against the handle
(Figure 22).
Figure 22
Disengaging the Blade
Release the blade-control bar (Figure 23).
Figure 23
Important: When you release the blade-control
bar, the blades should stop within 3 seconds. If
they do not stop properly, stop using your machine
immediately and contact an Authorized Service
Dealer.
g016484
2. Blade-control bar
g016485
G017596