Publicidad
Idiomas disponibles
Idiomas disponibles
Federal Communications Commission
WARNING
proved by the party responsible for compliance could
void the user's authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful in-
terference in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or televi-
sion reception, which can be determined by turning
the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
SPECIFICATIONS
Cat. No. ..................................................... 3701-20
Volts.............................................................. 18 DC
Battery Type .................................................M18™
Charger Type................................................M18™
Module/FCC ID ............................ BGM11S/QOQ11
Coin Cell Battery Type ............................... CR2032
Laser............................................................Class 2
Max Power........................................ P
Pulse Frequency............................................ 10 Hz
Pulse Duration ....................................... T
Wavelength........................................ 620 - 690 nm
Beam Divergence ................................... <1.5 mrad
Rotational Speed ......................................600 RPM
Leveling Range................... Total 10° in X or Y Axis
Working Range (With Receiver) ...2000' (Diameter)
Horizontal Plane Accuracy.................±3/32" at 100'
Altitude..........................................................<6560'
Pollution Degree .................................................. 2°
Typical Leveling Time ...................... <12 (Seconds)
Mounting Insert ............................................ 5/8"-11
Ingress Protection (Tool Only) ......................... IP66
Drop Rating ....................................................1.5 m
Tip Rating ..........................................................2 m
Bare Tool Weight .............................................7 lbs
Weight ........................................................ 11.4 lbs
(With heaviest compatible battery pack)
Maximum Relative Humidity (RH) .....................8 0 %
Decreasing Linearly Relative Humidity (RH) ..... 50%
Recommended Ambient
Storage Temperature....................... -4°F to 140°F
Operating Temperature .....................0°F to 122°F
Recommended Compatible
Receiver Cat. No. ....................................... 3711
NOTE: Accuracies and leveling times are meas-
ured on a level surface at ambient temperatures.
Use of the tool in extreme conditions may nega-
tively impact these specs.
Changes or modifications to
this unit not expressly ap-
≤3.3 mW
AVG
≤1.5 ms
P
for up to 88°F
at 104°F
FUNCTIONAL DESCRIPTION
1
11
10
14
13
1. Protective foam top
bumper
2. Laser aperture
window
3. Protective foam
handles
4. ON/OFF button
5. Leveling mode
indicator LED
6. Leveling mode button
7. Bump alarm indicator
LEDs
3
2
3
8. Bump alarm button
9. X/Y iron sights
10. Short lanyard
attachment handles
11. ONE-KEY™ indicator
LED
12. 5/8"-11 mounting insert
13. ONE-KEY™ Coin cell
compartment
14. Masking flaps (4)
4
5
6
7
8
9
12
Publicidad
