Publicidad
Dis-
Description
play
The left or right
The 9pin connector between
drive motor
the vehicle wire harness and
does not work.
the left drive controller is loose.
The 9pin connector between
the vehicle wiring harness and
the right drive controller is
loose.
The 10pin connector between
the vehicle wire harness and
the battery compartment is
loose.
The 4pin connector between
the vehicle wiring harness and
the seat switch is loose.
Poor contact of seat switch
connector.
The PCBA that controls the left
and right drive motors fails.
The 16pin connector between
the vehicle wire harness and
the left controller is loose , Or
the 16pin connector between
the vehicle wire harness and
the right controller is loose.
A high-voltage battery pack is
inserted in the of the battery
compartment.
A low-voltage battery pack is in-
serted in the of the battery com-
partment.
The power of the battery pack
in the of the battery compart-
ment is too low.
Español
Error code on
Cause
LCD
V11
The connector is loose. Contact a
V14
The connector is loose. Contact a
V21
The connector is loose. Contact a
V27
The connector is loose. Contact a
Seat switch fails.
TR13, TL13,
The PCBA fails.
TR22, TL22,
TR24, TL24,
TR25, TL25,
TR32, TL32
V31, TR23
The connector is loose. Contact a
TR11, TL11
Wrong battery pack ap-
plied.
TR12, TL12
Wrong battery pack ap-
plied.
The battery capacity is
not high enough.
101
Solution
specified serv-
ES
ice center.
specified serv-
ice center.
specified serv-
ice center.
specified serv-
ice center.
Contact a
specified serv-
ice center.
specified serv-
ice center.
Check the bat-
tery pack.
Check the bat-
tery pack.
Publicidad
