Publicidad
Dis-
Description
play
The left or right
blade does not
ES
work.
Español
The 6pin connector between
the left blade motor and the ve-
hicle wire harness is loose.
The left blade motor fails.
The 6pin connector between
the right blade motor and the
vehicle wire harness is loose.
The right blade motor fails.
The PCBA that controls the left
blade motor fails.
The PCBA that controls the
right blade motor fails.
The phase wire connector be-
tween the left blade motor and
the left blade controller is loose.
The phase wire connector be-
tween the right blade motor
and the right blade controller is
loose.
The left blade controller tem-
perature is too high.
The right blade controller tem-
perature is too high.
Error code on
Cause
LCD
ML15
The connector is loose. Contact a
The motor fails.
MR15
The connector is loose. Contact a
The motor fails.
ML16, ML18
The PCBA fails.
MR16, MR18
The PCBA fails.
ML17
The connector is loose. Contact a
MR17
The connector is loose. Contact a
ML21
The controller tempera-
ture is too high.
MR21
104
Solution
specified serv-
ice center.
specified serv-
ice center.
Contact a
specified serv-
ice center.
Contact a
specified serv-
ice center.
specified serv-
ice center.
specified serv-
ice center.
Power off the
machine, and
power on
again after the
controller cools
down for a
while.
Publicidad
