Publicidad
Idiomas disponibles
Idiomas disponibles
Tool Specifications
Rotary Hammer
Order number
Rated power
Output power
Rated speed
Impact rate
Impact energy per stroke
Chisel positions
Chiselling performance in
concrete of medium
hardness
Tool holder
Spindle collar diameter
Drilling output:
- Concrete (twist drill bit)
- Masonry (core bit)
- Wood
- Steel
Weight without cable,
approx.
Protection class
Noise/Vibration Information
Measured values determined according to
EN 50 144.
Typically the A-weighted noise levels of the prod-
uct are: sound pressure level: 89 dB (A); sound
power level: 102 dB (A).
Wear hearing protection!
The typically weighted acceleration is 11 m/s
Machine Elements
1 Dust protection cap
2 Locking sleeve
3 On/Off switch
4 Mode selector switch
5 Release button
6 Wing bolt for depth stop adjustment
7 Auxiliary handle
8 Depth stop
9 Keyless chuck*
* Not all of the accessories illustrated or described are
included as standard delivery.
BTI-BH 4-30 ME
016305
[W]
750
[W]
440
[rpm]
0 – 650
[bpm]
0 – 3900
[J]
3.5
36
[kg/h]
15
SDS-plus
[mm]
Ø 51
[mm]
4 – 30
[mm]
max. 80
[mm]
max. 30
[mm]
max. 13
[kg]
3.9
/ II
2
.
English - 1
For Your Safety
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. Before using
for the first time, ask for a practi-
cal demonstration.
Wear protective glasses and hearing protec-
tion.
Wear sturdy shoes.
For long hair, wear hair protection. Work only
with closely fitting clothes.
If the mains cable is damaged or cut through
while working, do not touch the cable but im-
mediately pull the mains plug. Never use the
machine with a damaged cable.
Connect machines that are used in the open via
a residual current device (RCD) with an actuat-
ing current of 30 mA maximum. Use only exten-
sion cables that are approved for outdoor use.
Always direct the cable to the rear away from
the machine.
Insert the mains plug only when the machine is
switched off.
Use the machine only with the auxiliary han-
dle 7.
Hold the power tool only by the insulated
gripping surfaces, when performing an op-
eration where the cutting tool may run into
hidden wiring or its own cord.
Contact with a "live" wire will make exposed
metal parts of the tool "live" and shock the op-
erator.
Use appropriate detectors to determine if
utility lines are hidden in the work area or
call the local utility company for assistance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes
property damage or may cause an electric
shock.
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
Always switch the machine off and wait until it
has come to a standstill before placing it down.
Never allow children to use the machine.
BTI is only able to ensure perfect operation of
the machine if the original accessories in-
tended for it are used.
Publicidad
