Pur Line HEATY EX BLACK Manual Del Usuario página 13

1. Install the adjusting bracket and the sliding
bracket.
3. Drill 4 holes in the wall and insert the 4 expansion
screws into the holes.
5. Fix two adjusting brackets, make sure to lock the
brackets with the butterfly screw.
Adjusting bracket
Spring washer
+Nut (M6)
Sliding bracket
Screw
Hole depth
45MM
Expansion
screws M8*60
Hole diameter
11MM
Screw+Flat washer+Elastic washer+Nut (M4)
Butterfly screw
2. Install the sliding bracket on the heater.
4. Fix the adjusting bracket to the wall.
11
Expansion
screw
Flat washer
Spring washer
Nut (M8)