Descargar Imprimir esta página

MSW Motor Technics MSW-SAW 2200 1P Manual De Instrucciones página 39

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 201
b)
Do not use the device in a potentially explosive environment, for example in the presence of
flammable liquids, gases or dust. The device generates sparks which may ignite dust or fumes.
c)
If you discover damage or irregular operation, immediately switch the device off and report it to a
supervisor without delay.
d)
If there are any doubts as to the correct operation of the device, contact the manufacturer's support
service.
e)
Only the manufacturer's service point may repair the device. Do not attempt any repairs
independently!
f)
In case of fire, use a powder or carbon dioxide (CO
electrical devices) to put it out.
g)
Children or unauthorised persons are forbidden to enter a work station. A distraction may result in
loss of control over the device.
h)
Use the device in a well-ventilated space.
i)
The device produces dust and debris during operation. It is important to protect bystanders from their
harmful effects.
j)
Regularly inspect the condition of the safety labels. If the labels are illegible, they must be replaced.
k)
Please keep this manual available for future reference. If this device is passed on to a third party, the
manual must be passed on with it.
l)
Keep packaging elements and small assembly parts in a place not available to children.
m) Keep the device away from children and animals.
n)
If this device is used together with another equipment, the remaining instructions for use shall also be
followed.
Remember! When using the device, protect children and other bystanders.
2.3.
Personal safety
a)
Do not use the device when tired, ill or under the influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the device.
b)
The device is not designed to be handled by persons (including children) with limited mental and
sensory functions or persons lacking relevant experience and/or knowledge unless they are supervised
by a person responsible for their safety or they have received instruction on how to operate the
device.
c)
The device can be handled only by physically fit persons who are capable of handling it, properly
trained, familiar with this manual and trained within the scope of occupational health and safety.
d)
When working with the device, use common sense and stay alert. Temporary loss of concentration
while using the device may lead to serious injuries.
e)
Use personal protective equipment as required for working with the device, specified in section 1
"Legend". The use of correct and approved personal protective equipment reduces the risk of injury.
f)
To prevent the device from accidentally switching on, make sure the switch is on the OFF position
before connecting to a power source.
g)
Do not overestimate your abilities. When using the device, keep your balance and remain stable at all
times. This will ensure better control over the device in unexpected situations.
h)
Do not wear loose clothing or jewellery. Keep hair, clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in moving parts.
i)
Remove all adjusting tools or spanners before turning the device on. A tool or spanner left in the
revolving part of the device may cause injury.
j)
The device is not a toy. Children must be supervised to ensure that they do not play with the device.
k)
Do not put your hands or other items inside the device while it is in use!
2.4.
Safe device use
a)
Do not overload the device. Use the appropriate tools for the given task. A correctly-selected device
will perform the task for which it was designed better and in a safer manner.
b)
Do not use the device if the "ON/OFF" switch does not function properly (does not switch the device
on and off). Devices which cannot be switched on and off using the "ON/OFF" (I/O) switch are
hazardous, should not be operated and must be repaired.
EN
) fire extinguisher (one intended for use on live
2

Publicidad

loading