Publicidad
Idiomas disponibles
Idiomas disponibles
Side Bench Extension (optional)
1. Align the other side bench extension flush with the saw bench.
2. Pushing the side bench extension onto the sawing bench using bolts M6×12 and loosely fasten the flat
washers and nuts M6.
3. Screw the short support struts to the bench extension and long centre brace with bolts M6×12,
washers 6 and nuts M6. See below illustration 1, the hose holder will be fixed with bench extension
and long support strut at the same time.
4. Tight the bolts and nuts slightly by hand.
EN
A – Short Support Strut
B – Hose Holder
Publicidad
