Publicidad
Idiomas disponibles
Idiomas disponibles
c)
Disconnect the device from the power supply before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces the risk of accidental activation.
d)
When not in use, store in a safe place, away from children and people not familiar with the device who
have not read the user manual. The device may pose a hazard in the hands of inexperienced users.
e)
Keep the device in perfect technical condition. Before each use check for general damage, especially
check moving components for cracked parts or elements, and for any other conditions which may
impact the safe operation of the device. If damage is discovered, hand over the device for repair
before use.
f)
Keep the device out of the reach of children.
g)
Device repair or maintenance should be carried out by qualified persons, only using original spare
parts. This will ensure safe use.
h)
To ensure the operational integrity of the device, do not remove factory-fitted guards and do not
loosen any screws.
i)
When transporting and handling the device between the warehouse and the destination, observe the
occupational health and safety principles for manual transport operations which apply in the country
where the device will be used.
j)
Avoid situations where the device stops working during use due to excessive loading. This may result
in overheating of the drive elements and damage to the device.
k)
Do not touch articulated parts or accessories unless the device has been disconnected from the power
source.
l)
Do not move, adjust or rotate the device in the course of work.
m) Do not leave this appliance unattended while it is in use.
n)
Clean the device regularly to prevent stubborn grime from accumulating.
o)
Do not work on two workpieces at the same time.
p)
The device is not a toy. Cleaning and maintenance may not be carried out by children without
supervision by an adult person.
q)
It is forbidden to interfere with the structure of the device in order to change its parameters or
construction.
r)
Keep the device away from sources of fire and heat.
s)
Do not cover the ventilation openings!
t)
WARNING! Some components of the device become hot during operation! It is forbidden to
touch hot components of the system during and after immediate operation! Risk of burns!
Wear appropriate footwear when operating the device! It is forbidden to operate the device
u)
barefoot, in sandals or other light footwear!
v)
Do not use cracked, deformed or worn saw blades!
w)
Replace worn saw blades immediately!
x)
Use saw blades recommended by the manufacturer.
y)
Always adapt the type of saw blades to the material being cut!
When working with the device, you are recommended to exercise extreme caution to avoid
z)
serious injury or amputation of limb fragments.
ATTENTION! Despite the safe design of the device and its protective features, and despite the use
of additional elements protecting the operator, there is still a slight risk of accident or injury when
using the device. Stay alert and use common sense when using the device.
3. Use guidelines
The device is intended for cutting wood.
The user is liable for any damage resulting from unintended use of the device.
EN
Publicidad
