Descargar Imprimir esta página

afx light HYPNOTIC 16-2105 Manual De Instrucciones página 4

Estroboscopio rgbw controlado por dmx

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

<DOWN>: Navigates downward through the menu list or decreases the numeric value when in a
function
<ENTER>: Enables the currently displayed menu or sets the currently selected value in to the cur-
rent function
MENU STRUCTURE
Display
Function
A001
DMX address
CHND
Channel mode 4 / 6 / 13 / 16 / 32 channels
FAIL
DMX signal
failure
CL01-CL15
Static color
mix
E000-E055
Effect mode
SOU0-SOU3 Sound-
controlled
mode
MANU
Manual mode
TEST
Test mode
LED
Digital display
illumination
VER
Version
FACTORY SETTINGS MENU
Note: In A001 address menu keep ENTER button pressed to access to the factory settings menu
Function
R000-r255
G000-g255
B000-b255
U000-U255
L OFF/L ON
T000-T100
N OFF/n40-n100
DOFF/d ON
EN
4
Description
A001 - A512
HOLD: Keep operating during DMX signal failure
BLND: Light OFF when DMX signal is disconnected
15 combinations of static color mixing. Press ST01-ST16 after confirma-
tion to set the strobe speed from slow to fast
55 built-in auto effects. Press ST01-ST16 after confirmation to set the
strobe speed from slow to fast
E000: All preset effects. Keep the ENTER button pressed to adjust the color
of the effect
SOU0: Sound-controlled effect
SOU1: Sound-controlled discoloration
SOU2: Sound-controlled DB1
SOU3: Sound-controlled DB2
After pressing the ENTER button, press SE1-99 to adjust the sound sensiti-
vity from low to high
D000--D255: Total dimming
R000--R255: Red dimming
G000--g255: Green dimming
B000--B255: Blue light dimming
U000--U255: White light dimming
S000--S255: Strobe speed from slow to fast
Test all LEDs: R G B W
ON: Display is always light up
OFF: Display turns off after 60s without button operation
V10
Description
Limit red brightness
Limit green brightness
Limit blue brightness
Limit white brightness
LOFF is currently monochrome, and LON is currently all bright
Only display temperature, cannot be set
Set the starting temperature of automatic temperature drop (65 degrees)
DOFF dimming delay off, d ON dimming delay on
© Copyright LOTRONIC 2023

Publicidad

loading