Beper 50.929B Manual De Instrucciones página 15

Steam iron Use instructions
INSTRUCTION FOR USE
When used for the first time a little smoke may appear but will stop after a few minutes.
Before using the iron remove adhesive or protective film from the soleplate using if neces-
sary a wet cloth.
Do not scratch the soleplate with metallic object, as well as zip, buttons, etc.
Check that the tank is empty with water (2); if using steam function it is necessary to fill the
tank with water (see paragraph steam ironing).
Before plugging the iron on the socket, check that the main voltage correspond to the one
used for the iron.
ATTENTION: THE SOLEPLATE IS VERY HOT, DO NOT TOUCH DURING USE !
KEEP AWAY FROM CHILDREN.
IRONING
1 – Set the temperature (8) on "MIN".
2 – Fill the yank with water.
3 – Place the iron in vertical position, the soleplate does not be in contact with objects or
other.
4 – Plug the appliance to the socket.
5 – Set the desired temperature, using symbols on the thermostat.
6 – Start ironing.
7 – After ironing, put the iron in vertical position and unplug the appliance.
The iron must always in movement on the fabric when used.
TEMPERATURE SETTING
Always check the washing and ironing labels of clothes. If necessary, see instructions
below:
SYMBOL FABRIC
Do not iron
Synthetic, Nylon, Acryilic, Rayon
Wool, Silk
Cotton, Flax
15