Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
3. As the machine starts to operate, readjust the parameters if desired.
-
During grinding (the control panel display shows "g" icon), press the "+" or "-" buttons to
adjust the amount of coffee powder. During coffee preparation ("mI" is displayed on the
right-hand side of the display), click the "+" or "-" icons to adjust the number of millilitres
of coffee.
-
Press on the double coffee icon to brew 2 cups of coffee.
-
Press "EXIT" to finish the operation.
Preparing an Americano
1. Adjust the height of the coffee spout and place a cup underneath. To adjust, simply slide
the output up or down.
2. Press the Americano button to prepare an Americano coffee.
3. As the machine starts to operate, readjust the parameters if desired.
-
During grinding (the control panel display shows "g" icon on the right), press the "+" or
"-" buttons to adjust the amount of coffee powder. During coffee preparation ("ml" is
displayed on the right-hand side of the control panel display), press "+" or "-" to adjust
the amount of liquid coffee. Press the double coffee button to prepare two Americano
coffees.
-
Press EXIT to stop coffee preparation.
Installing the milk tank
1. The milk tank is fitted to the bottom rack by the shape of its base.
2. Open the milk tank lid and fill the milk tank to the desired level. Then close the lid. Keep in
mind that if you put more milk in than the quantity you are going to use, it will stay out of
the refrigerator longer than it should, which could spoil it and cause unpleasant odours.
Place the pipe connecting the milk tank to the coffee machine as shown in figure 1. To do this,
connect the milk tank outlet to the inlet on the right side of the coffee spout.
Preparing hot water or milk (using the milk tank)
-
Adjust the height of the coffee spout and place a cup underneath. To adjust, simply slide
the output up or down.
-
Press the "Water/Milk" icon to dispense water.
-
Press and hold the "Water/Milk" icon for 3 seconds to prepare a glass of milk.
-
If you want to stop dispensing water or milk because you already have enough water or
milk, press the "Menu/Exit" button to stop the flow.
Preparing a Capuccino or Latte (using the milk tank)
1. Adjust the height of the coffee spout and place a cup underneath. To adjust, simply slide
the output up or down.
46
2. Press the "Cappuccino/Latte" icon to dispense a Cappuccino.
3. Press and hold "Cappuccino/Latte" for 3 seconds to prepare a Latte.
4. If you want to stop dispensing water or milk because you already have enough water or
milk, press the "Menu/Exit" button to stop the flow.
Warning: Clean the milk outlet immediately after use. Prevent milk residues from blocking
the outlet and creating unpleasant odours.
Adjusting the grinding level
Fig. 3
WARNING: When you need to adjust the grind level of the coffee beans, turn the grind level
knob when the grinder is in operation, otherwise the grinder may be damaged.
-
Adjust the grind level according to the degree of roast of the coffee beans you use
(medium roast beans are recommended). If the coffee comes out too slowly during
brewing (the coffee powder is too fine), turn the grind level knob to a coarser grind as
shown in figure 3. If during brewing the coffee comes out too fast and too clear (the
coffee powder is too coarse), turn the grind level knob until a finer grind is obtained.
-
If the coffee powder is too coarse, turn the grind level knob counterclockwise for a finer
grind; if the coffee powder is too fine, turn the grind level knob clockwise for a coarser
grind.
Points to bear in mind:
1. The dial is set to the maximum value during the first few uses. It is recommended not to
adjust it after the first 100-150 cups. The more repetitive the grinding process, the more
the grinder will be adjusted and the less malfunctions will be found in the future.
2. Do not overfill the bean container or leave the coffee beans inside for a long time so that
they do not get too wet and lose freshness (especially on humid days). Moisture will
affect the grind, brew and taste of the coffee.
3. If the coffee beans are wet, empty the container and fill it with fresh coffee beans for
better taste. Turn the grind level knob to maximum and try grinding the coffee beans. If
the coffee machine is working properly, return the knob switch to its original position. By
doing this, you will be able to check if there are any beans left inside.
4. If the coffee beans do not grind properly, it is possible that the coffee beans are too wet
or that there is too much coffee bean oil accumulated inside. In the latter case, add some
grinder cleaner to the bean container and try grinding again.
CREMMAET COMPACTCCINO BLACK / BLACK ROSE / WHITE ROSE / BLACK SILVER
ENGLISH
47
Publicidad
