cecotec CUMBIA CREMMAET COMPACTCCINO BLACK Manual De Instrucciones página 27

ENGLISH
2 The display 2.1. The water tank is not
shows a square installed correctly.
of dashed lines
(FIGURE 5) and
the machine
2.2 No water flows through
does not
the pump.
dispense water.
2.3 The internal piping is
blocked.
3 The display 3.1
shows a square The water flow meter
of dashed lines wires are coming loose.
(FIGURE 5), or the water flow meter
pressing the is broken.
EXIT button will
drain the water,
but the warning
cannot be
removed.
4,1 Grinding too fine.
After filling the
4
4.2 container with dark
Watery/light
roasted or oily coffee
coffee.
beans, the grinder
blades are sticky, and
the coffee is not ground.
Residues and wet coffee
4.3 beans block the grinder.
52
Install the tank properly
inside the coffee machine.
Push the bottom side all the
way in.
Open the rear panel and
inject water into the water
pump.
Please contact Cecotec's
Official Technical Support
Service.
Please contact Cecotec's
Official Technical Support
Service.
Turn the grind level knob
to obtain a coarser ground
coffee.
Increase the grinding level or
contact Technical Support.
Remove damp coffee beans,
clean the container and add
the coffee bean cleaner.
No. Problem Num Possible cause
5.1 The water tank is not
installed correctly.
5
No coffee
5.2 Filter blocked.
comes out.
5.3 The internal piping of
the coffee machine is
blocked.
6.1 Grinder blocked by
foreign objects.
The grinder cables are
6 The grinder
6.2 loose.
does not
work.
6.3 The grinder motor is
broken.
7.1 The transformer is
7 The broken.
processing
unit does not
7.2 The microswitch is
work.
broken.
6. TECHNICAL SPECIFICATIONS
Product reference: 01598 / 01478/ 01543 / 01800
Product: Cremmaet Compactccino Super-automatic Coffee Machine Black
Rated Power: 1100 - 1350 W (Coffee)
Voltage: 220-240 V
Frequency: 50/60 Hz
CREMMAET COMPACTCCINO BLACK / BLACK ROSE / WHITE ROSE / BLACK SILVER
ENGLISH
Solution
Install the tank securely inside
the coffee machine.
Clean or replace the filter.
Descale the coffee machine
If this does not solve the
problem, contact Cecotec's
Official Technical Support
Service.
Remove foreign objects from
the grinder.
Please contact Cecotec's
Official Technical Support
Service.
Please contact Cecotec's
Official Technical Support
Service.
Please contact Cecotec's
Official Technical Support
Service.
Please contact Cecotec's
Official Technical Support
Service.
53