Descargar Imprimir esta página

geberit 115907KJ6 Manual página 31

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 108
Commands
Menu item
Description
[EN]
[DE]
Check detection range
As soon as an object is located in the
detection range, the red LED in the
22
sensor window lights up. No flush is
[RangeTest]
actuated. The function switches off
[TestErfas]
automatically after 10 minutes.
The active sensor for the detection
area is selected with menu item 47.
Activate cleaning mode
The flush actuation is suppressed for
the [cleaning time] (menu item 42).
23
The LED in the sensor window flashes
[CleanMode]
every 3 seconds. The function is
[Reinigung]
cancelled by re-establishing
connection with the Geberit Service
Handy.
Block flush
Flush actuation is blocked for
24
10 hours. The function is cancelled by
[BlocFlush]
re-establishing the connection with the
[Blockiere]
Geberit Service Handy. The function
switches off automatically after
10 hours.
25
Factory setting
[FactrySet]
All functions are reset to factory
[Werkeinst]
settings.
Programs
Enable automatic flush
30
A flush is actuated automatically when
[AutFlshEn]
the user steps back from the toilet.
[AutFlshEn]
Manual flush actuation is no longer
necessary.
Enable manual flush
31
An early manual flush can be actuated
[ManFlshEn]
by the user placing their hand directly
[FreiManSp]
in front of the IR sensor.
32
Activate power-on flush
[PowOnFlsh]
A flush is actuated after switching on
[NetzEinSp]
the mains voltage.
33
Activate preflush
[PreFlush]
A partial flush is actuated when a user
[Vorspülng]
is detected.
9007203771121035 © 04-2022
970.755.00.0(00)
Application
• To test user recog-
nition
• To clean the actuator
plate and the WC
without the water
running
• To carry out
maintenance work
• In the event of
malfunctions
• Hygiene – There is no
need to touch the
actuator plate.
• To perform central
flush actuation
• To confirm a function
• To wet the WC
ceramic appliance
before use to avoid
deposits
Value
Factory
setting
Start = <OK>
Start = <OK>
Start = <OK>
Start = <OK>
Confirm =
<R>, <OK>
On = <ON>
On
Off = <OFF>
On = <ON>
On
Off = <OFF>
On = <ON>
Off
Off = <OFF>
On = <ON>
Off
Off = <OFF>
2 / 4
EN
31

Publicidad

loading

Este manual también es adecuado para:

Sigma10115909sn6