Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Menu item
Functions
[Interval flush]
[Power-on flush]
[Preflush]
[Automatic flush]
[Manual flush]
36
Description
Activate the interval flush
• User-controlled: A flush is
actuated at the end of the [flush
interval], whereby the flush
interval is restarted with every
use. The flush time is
determined by the [flush time]
value.
• Interval-controlled: A flush is
actuated at the end of the [flush
interval], regardless of the
number of uses. The flush time
is determined by the [flush time]
value.
• Difference flush: A flush is
actuated at the end of the [flush
interval], regardless of the
number of uses. If flushes have
already been performed within
the [flush interval], the postflush
only makes up the difference in
[flush time].
[Flush time]
[Flush interval]
[Flush volume]
The flush volume for the interval
flush is calculated from the [flush
time] above and the [flush volume
settings].
A flush is actuated after switching
on the mains voltage.
A partial flush is actuated when a
user is detected.
A flush is actuated automatically
when the user steps back from the
toilet. Manual flush actuation is no
longer necessary.
An early manual flush can be
actuated by the user placing their
hand directly in front of the IR
sensor.
Application
• To fill the trap in the
case of low user
frequencies
• To flush out standing
water in the pipe
(hygiene function – to
prevent stagnation)
–
–
• Flush volume display
• To perform central flush
actuation
• To confirm a function
• To wet the WC ceramic
appliance before use to
avoid deposits
• Hygiene – There is no
need to touch the
actuator plate.
• To actuate a manual
flush during use
Value
Factory
setting
[Off], [User-
controlled],
[Interval-
[User-
controlled],
controlled]
[Difference
flush]
1–200 s
5 s
1–168 h
24 h
–
–
On/Off
Off
On/Off
Off
On/Off
On
On/Off
On
2 / 4
9007203771121035 © 04-2022
970.755.00.0(00)
Publicidad
