geberit 115907KJ6 Manual página 37

Menu item Description
[Full flush]
This flush volume sets the time for
opening the flush valve for a full
flush. The specified flush volumes
are reference values and depend
on the WC ceramic appliance.
[Flush volume [Partial flush (statistics)]
setting] (for The flush volume of the partial
Sigma concealed
flush must be specified to
cisterns 12 cm)
calculate the water consumption.
The flush volume of the partial
flush can be set on the flush valve.
[Flow pressure (statistics)]
The flow pressure in the supply
pipe must be specified to calculate
the water consumption.
[Full flush (statistics)]
The flush volume of the full flush
must be specified to calculate the
water consumption. The flush
volume of the full flush can be set
on the flush valve.
[Partial flush]
[Flush volume
This flush volume sets the time for
setting] (for
opening the flush valve for a
Sigma concealed
partial flush. The specified flush
cisterns 8 cm)
volumes are reference values and
depend on the WC ceramic
appliance.
[Flow pressure (statistics)]
The flow pressure in the supply
pipe must be specified to calculate
the water consumption.
Once the user has left the user
detection range, a flush is not
actuated until the set time has
[Flush delay]
elapsed. The flush delay is only
relevant when automatic flush
actuation is activated.
The minimum detection time in the
user detection range is set so that
users can be detected as a
[Detection time] standing or seated user. The
detection time is only relevant
when automatic flush actuation is
activated.
9007203771121035 © 04-2022
970.755.00.0(00)
Application
• Optimum flushing of the
WC ceramic appliance
• For the statistics
function
• To calculate the flush
volume of the interval
flush
• For the statistics
function
• To calculate the flush
volume of the interval
flush
• For the statistics
function
• To calculate the flush
volume of the interval
flush
• For the statistics
function
• To calculate the flush
volume of the interval
flush
• Optimum flushing of the
WC ceramic appliance
• For the statistics
function
• To calculate the flush
volume of the interval
flush
• For the statistics
function
• To calculate the flush
volume of the interval
flush
–
• To prevent flushes due
to unintentional entry of
a person into the user
detection range
Value Factory
setting
4.5 l
5 l
5.5 l
6 l
6 l
6.5 l
7 l
1–5 l 2.5 l
0.5–10 bar 3 bar
1–8 l 6 l
2.5 l
3 l
3.5 l 3.5 l
4 l
4.5 l
0.5–10 bar 5 bar
1–15 s 3 s
1–60 s 7 s
3 / 4
37
EN